Pressure Pipe And Intake Manifold (V6 BITURBO)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressure Pipe And Intake Manifold Components Location With Torque Specification - V6 Biturbo

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure pipe and intake manifold - V6 biturbo

1	Intake manifold
2	Screws, M6 x 32 > Tightening torque 9 Nm (6.5 ftlb.)
3	Seal/Replace if damaged
4	Pressure pipe
5	Screws, M6 x 23 > Tightening torque 9 Nm (6.5 ftlb.)
6	Seal/replace
7	Connecting hose
8	Screw-type clamp > Tightening torque 3.5 Nm (2.5 ftlb.)
9	Temperature sensor
10	Screw > Tightening torque 9 Nm (6.5 ftlb.)