Charge-Air Cooling

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Charge-Air Cooler Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Charge-air cooler

1	Charge-air cooler
2	Holder
3	Screws, M6 x 20 > Tightening torque 9 Nm (6.5 ftlb.)
4	Pressure hose
5	Screw-type clamp > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.)
6	Screw-type clamp > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.)
7	Screws, M6 x 18 > Tightening torque 8 Nm (6 ftlb.)
8	O-ring/replace
9	Boost pressure sensor
10	O-ring/replace
11	Screw > Tightening torque 5 Nm (3.5 ftlb.)
12	Pressure hose
13	Screw-type clamp > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.)
14	Screw, M6 x 14 > Tightening torque 6.5 Nm (4.75 ftlb.)