Carbon Canister

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Carbon Canister Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Carbon canister

1	Carbon canister
2/1-2/2-2/3	Tightening sequence for M6 hexagon nuts for carbon canister
2/1 and 2/2	> Tightening torque 6 Nm (4.5 ftlb.)
2/3	> Tightening torque 6 Nm (4.5 ftlb.)
3	Connection for leakage diagnosis unit connector
4	Threaded bolt

Not shown: Leakage diagnosis unit to carbon canister: Tapping screw, M5 x 12 > Tightening torque 2 Nm (1.5 ftlb.)

Pressure sensor holder: Screw, M6 x 20 > Tightening torque 9 Nm (6.5 ftlb.)

Holder for tank ventilation control valve: Screw, M6 x 20 > 26-51

Tightening torque 9 Nm (6.5 ftlb.)

Damping element holder: Screw, M6 x 12 > Tightening torque 9 Nm (6.5 ftlb.)