Installing Tie-Rod Ball

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit tie-rod ball -1- on the tie rod.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Securing tie-rod ball
1. 1.1 Tighten lock nut -2- > Tightening torque 90 Nm (67 ftlb.)
2. 1.2 Counter the tie-rod ball -1- at the flattened areas -arrows- using a suitable open-ended wrench.
Fit tie-rod ball -1- on the wheel bearing housing.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for tie-rod ball on wheel bearing housing
1. 2.1 Tighten nut -2- > Tightening torque 85 Nm (63 ftlb.)
Connect and lock electric connector -2- on the front speed sensor -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for front speed sensor