LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (40 Wheel Suspension Front Drive Shaft 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Anti-roll bar to connecting link (conventional) Item 3: Hexagon-head bolt, M12x1.5 X  50/always replace bolts following removal! Initial tightening 70 Nm (52 ftlb.)    
G15857595Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar to connecting link (conventional) Item 3: Hexagon-head bolt, M12x1.5 X  50/always replace bolts following removal! Final tightening + 90°    
G15857596Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10x 32/always replace bolts following removal! Initial tightening 50 Nm (37 ftlb.)    
G15857597Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10x 32/always replace bolts following removal! Final tightening + 30°    
G15857598Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount