LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (40 Wheel Suspension Front Drive Shaft 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 400819 Removing And Installing Front-Axle Support >> Removing And Installing Front-Axle Support (Front Section) >> Remove Front-Axle Support (Front Section)

Remove Front-Axle Support (Front Section)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove add-on parts from front-axle support.
    G15857442Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for add-on parts

    1. 1.1 Unscrew screws -1-  for oil lines.
    2. 1.2 Unscrew screws -2-  for oil line/oil cooler holders.
    3. 1.3 If installed:  Remove expansion rivets -3-  for heat insulation (only at the right on petrol engines).
  2. Unscrew screws -2 and 3-  .
    G15857443Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for front-axle support (front section)