Installing Front-Axle Support (Front Sections)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Tighten screws -2 and 3- .
-2- : > Tightening torque 55 Nm (41 ftlb.)

-3- : > Tightening torque 30 Nm (22 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for front-axle support (front section)
Fit add-on parts on front-axle support.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for add-on parts
1. 2.1 Tighten screws -1- for oil lines > Tightening torque 6 Nm (4.5 ftlb.)
2. 2.2 Tighten screws -2- for oil line/oil cooler holders > Tightening torque 8 Nm (6 ftlb.)
3. 2.3 If installed: Fit expansion rivets -3- for heat insulation. (Only at the right on petrol engines).