Removing Coolant Temperature Sensor (Cylinder Housing)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
When the engine is cold, the cap on the coolant reservoir can be opened briefly in order to release residual pressure in the cooling system.
- Set oil and coolant lines aside.
Information
If sealing rings remain stuck in the cylinder head, pull with a wire.
Information
Re-install temperature sender (cylinder crankcase) as quickly as possible or close it off using a suitable stopper to prevent unnecessary coolant loss.
- Remove coolant temperature sensor (cylinder housing) -1-
.
- 2.1 Release and unplug electric plug connection -2- .
- 2.2 Place a cloth underneath to soak up emerging coolant.
- 2.3 Unscrew and remove screw -3- .
- 2.4 Remove coolant temperature sensor (cylinder housing) -1- .
Removing coolant temperature sensor (cylinder housing)