LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (19 - Engine - Cooling 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 196919 Removing And Installing Control Valve (V6 Turbo) >> Removing Control Valve

Removing Control Valve

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The pictures and graphics shown may differ from the original depending on engine variants, additional equipment and/or country specifications.

However, the technical accuracy of the specifications is guaranteed.

  1. Disconnect coolant line -1-  .
    1. 1.1 Loosen screw -2-  .
    G15822529Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant line

  2. Remove control valve -1-  .
    1. 2.1 Pull off vacuum hose -2-  .
    2. 2.2 Unscrew screws -3-  .
    3. 2.3 Pull coolant line out of the control valve -1-  and remove control valve -1-  .
    4. 2.4 Catch emerging coolant.
    5. 2.5 Replace O-ring -4-  and seal -5-  .
    G15822530Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Control valve