LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (19 - Engine - Cooling 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 195819 Removing And Installing Coolant Regulator (Thermostat Insert) (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cooling fan housing (radiator frame).

    > 192019 REMOVING AND INSTALLING COOLING FAN HOUSING (RADIATOR FRAME) 

  2. Fill up coolant.

    > 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING) 

  3. Only for V6 monoturbo:  Install centre intake-air distributor.

    > Removing and installing centre intake-air distributor (V6 monoturbo) 

scientia non olet · About LEMON Manuals