LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (19 - Engine - Cooling 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 195019 Removing And Installing Coolant Pump (V6 Turbo) >> Concluding Work >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure air-conditioning compressor.

    > WM, 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR - Coupe or WM, 873419 REMOVING AND INSTALLING ELECTRIC AIR-CONDITIONING COMPRESSOR - Wagon

  2. Install the drive belt.

    > 137819 REMOVING AND INSTALLING DRIVE BELT

  3. Only for V6 monoturbo: 

    Install intake distributor centre.

    > Refer to the appropriate Service Information for Removing and installing centre intake-air distributor (V6 monoturbo)

  4. Fill with coolant and bleed the cooling system.

    > 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING) 

scientia non olet · About LEMON Manuals