Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install strut -4- .

1.1 Position strut -4- and screw in screw -5- and -6- .

Tightening torque for screw -5- securing strut to chassis subframe: > Initial tightening 20 Nm (15 ftlb.)

> Final tightening + 90°

Tightening torque for screw -6- securing strut to reinforcement: > Tightening torque 20 Nm (15 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing strut

Secure electric lines to strut -4- .
1. 2.1 Fit bracket -2- with electric lines and screw in and tighten nut -1- > Tightening torque 4 Nm (3 ftlb.)
2. 2.2 Clip electric line -3- into strut -4- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Securing bracket and clipping in electric line
Fill in coolant and bleed the cooling system.
> 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING)
Install front trim panel (engine compartment) at the right.
> WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - Coupe or WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - Wagon
Install cover for front lock support.
> WM, 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT - Coupe or WM, 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT
Connect the battery.
> 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY