LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (19 - Engine - Cooling 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 193519 Removing And Installing Cooling-Air Flaps >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

If the component is replaced, perform adaptation using the PIWIS Tester.

  1. Install front bumper.

    > WM, 631019 REMOVING AND INSTALLING FRONT BUMPER

  2. Perform adaptation. Follow the procedure on the Tester and comply with instructions.
    1. 2.1 Hybrid vehicles: 

      Path: Thermal management control unit --> Maintenance/repairs --> Teach cooling-air flaps

    2. 2.2 Non-Hybrid vehicles: 

      Path: DME control unit --> Maintenance/repairs --> Adaptation