Installing The Starter
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
- Screw in and tighten nut securing B+ line to starter > Tightening torque 23 Nm (17 ftlb.) +/- 10 %
- Screw in and tighten nut securing control line to starter > Tightening torque 9 Nm (6.5 ftlb.)
- Screw in and tighten screws > Tightening torque 45 Nm (33 ftlb.) + 10 % - 15 %