LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (27 Starter, Power Supply, Cruise Control 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 2706IN General Information On AGM Vehicle Battery >> Charging The Battery

Charging The Battery

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Highly inflammable or explosive materials 
  • Danger of fire or explosion 

    → Avoid contact with hot parts or sources of ignition.

    → Use suction to remove ignitable vapors.

    → Attach warning sign in a clearly visible position.

    → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.

    → Secure collection containers/vessels to prevent them from tipping over.

Information 

NOTE: A battery charger for providing an external power supply or for jump-lead starting is connected directly to the battery in the vehicle. 
  • Damage to battery sensor. 
  • Battery sensor sends incorrect battery values to the vehicle electrical system. 

    → Always connect a battery charger for providing an external power supply or for jump-lead starting to the defined connections in the engine compartment.

> WM, 2X00IN BATTERY TRICKLE CHARGE

  1. Switch off ignition and remove ignition key.
  2. Switch off all loads (e.g. lights).
  3. Open protective cover on the positive terminal for the external power connection.
    G15877650Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    External power connection

  4. Connect wires from the charger to the external power supply points.
  5. Set the charge current on the battery charger according to the battery capacity.
  6. Switch on battery charger.
  7. Charge the battery.

    Totally discharged batteries must not be charged and must be replaced.