LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (10 Engine - Crankcase, Suspension 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 103719 Removing And Installing Torque Support >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screw, torque support replace Initial tightening 50 Nm (36.9 ftlb.)    
Screw, torque support   torque angle + 90°    
Side strut to body Hexagon-head bolt, M8 x 45/always replace bolts following removal Initial tightening 20 Nm (15 ftlb.)    
Side strut to body Hexagon-head bolt, M8 x 45/always replace bolts following removal Final tightening + 90°