LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (10 Engine - Crankcase, Suspension 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 101419 Removing And Installing Crankcase Cover (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Screw on guide tube for oil dipstick Replace O-ring. Tightening torque 9 Nm (6.5 ftlb.)    
Screws on crankcase cover Replace following removal. Initial tightening 3 Nm (2 ftlb.)    
Screws on crankcase cover, on belt side Replace following removal. Final tightening + 90°    
Screws on crankcase cover in oil guide housing Replace following removal. Final tightening 9 Nm    
Screw securing tensioning roller for air-conditioning compressor to air-conditioning compressor bracket   Tightening torque 25 Nm (19 ftlb.)    
Aluminium screw securing air-conditioning compressor bracket to crankcase Replace following removal. Initial tightening 8 Nm (6 ftlb.)    
Aluminium screw securing air-conditioning compressor bracket to crankcase Replace following removal. Final tightening + 90°    
Screws for control valve holder   Tightening torque 9 Nm (6.5 ftlb.)