Installing Oil Spray Jet
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
Risk of damage to oil spray jets:
- Do not bend oil spray jet.
- After re-installing the pistons, check that the oil spray jet has sufficient clearance.
- Bent oil spray jets must be replaced.
Information
Risk of damage to oil spray valves:
- Do not bend oil spray jets.
- Bent oil spray valves must be replaced.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Replace and tighten screws on oil spray jet following removal.
> Initial tightening 10 Nm (7.5 ftlb.)
> Final tightening + 45°
- 1.2 Tighten screws on oil windage tray in diagonally opposite sequence.
> Initial tightening 3 Nm (2 ftlb.)
> Final tightening + 90°
- 1.1 Replace and tighten screws on oil spray jet following removal.