Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The engine must be supported on the body in order to remove the front axle, oil guide housing, oil pump or similar components.

Remove engine cover.
> 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 BITURBO)

> 108319 Removing and installing engine cover (Design Cover) (V8 biturbo)

> 108319 Removing and installing engine cover (design cover) (V8 Diesel)
Remove front trim panels.
→ WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)
If used: Remove torque support.
> 103719 REMOVING AND INSTALLING TORQUE SUPPORT
Loosen fuse box in the engine compartment.
1. 4.1 Unscrew screws -1- .
2. 4.2 Swivel fuse box -2- aside.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fuse box in engine compartment
Disconnect moulded hoses at the top on the charge-air cooler.
→ WM, 214319 REMOVING AND INSTALLING CHARGE-AIR COOLER
Other preliminary work may be required, depending on engine type.