LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (13 Engine - Crank Drive, Pistons 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 134801 Checking Crankshaft (Checking Bearing Clearance) (V6 Turbo) >> Checking Crankshaft (Checking Bearing Clearance) >> Checking Axial Play Of Crankshaft

Checking Axial Play Of Crankshaft

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit dial gauge.
    1. 1.1 > VW387 - Universal dial gauge bracket-2-  must be fitted on the cylinder block.
    2. 1.2 > VAS 6079 - Dial gauge  must be inserted in the > VW387 - universal dial gauge bracket  .
    3. 1.3 > VAS 6079 - Dial gauge  must then be fitted on the crankshaft web -1-  .
    4. 1.4 Press crankshaft web -1-  by hand against the > VAS 6079 - dial gauge  (-arrow-  ) and set > VAS 6079 - dial gauge  to zero.
    5. 1.5 Press crankshaft web -1-  by hand away from the > VAS 6079 - dial gauge  (-arrow-  ) and read off the value.
    G15821363Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Measuring axial play of crankshaft

      Minimum Maximum
    Permissible axial play in mm  0.013 0.251
scientia non olet · About LEMON Manuals