LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 195019 Removing And Installing Coolant Pump (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain coolant.

    > WM, 193817 DRAINING AND FILLING COOLANT 

  2. Only for V6 monoturbo:

    Remove central intake distributor.

    > WM, 244619 REMOVING AND INSTALLING CENTRE INTAKE-AIR DISTRIBUTOR (V6 MONOTURBO)

  3. Remove the drive belt.

    > WM, 137819 REMOVING AND INSTALLING DRIVE BELT (V6)

  4. Loosen air-conditioning compressor and tie it up at the side.

    > WM, 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR (Coupe) , WM, 873429 CLEANING ELECTRIC AIR-CONDITIONING COMPRESSOR (Wagon)