LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (19 - Engine - Cooling 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 194019 Removing And Installing Coolant Reservoir >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery.

    > WM, 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

  2. Remove cover for front lock support.

    > 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT

  3. Remove front trim panel (engine compartment) at the right.

    > WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) (Coupe) , WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) (Wagon)

  4. Drain coolant.

    > WM, 193817 DRAINING AND FILLING COOLANT 

  5. Disconnect electric lines on strut -4-  .
    1. 5.1 Unscrew nut -1-  and set bracket -2-  with electric lines aside.
    2. 5.2 Unclip electric line -3-  from the strut -4-  .
    G15821762Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening bracket and unclipping electric line

  6. Remove strut -4-  .
    1. 6.1 Unscrew screw -5-  and -6-  and remove strut -4-  .
    G15821763Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing strut