Installing Pressure Sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Replace O-ring on the pressure sensor and coat it with refrigerant oil.
Information

Support the refrigerant line with your hand close to the pressure sensor when screwing the pressure sensor on and off.
Screw pressure sensor -2- onto the thread by hand and then tighten to the prescribed tightening torque > Tightening torque 5 Nm (3.5 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing pressure sensor
Plug in electric plug connection -1- on the pressure sensor until it engages securely.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connecting connector for pressure sensor