Compressor Run-In After Installing A New Air-Conditioning Compressor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The Compressor run-in function can only be carried out when the engine is running.
- The prerequisites for compressor run-in can be found directly under the Teach air-conditioning compressor function in the air-conditioning control unit in the PIWIS Tester.
- Specifications in PIWIS Tester have priority and take precedence over the specifications in the description.
- Set air conditioning to A/C MAX using the operator control unit on the centre console.
- > 9900 - PIWIS Tester 3 must be connected to the vehicle before starting it. Switch on ignition.
- Select the required vehicle type.
- Select the Air conditioning control unit in the overview .
- Maintenance/repairs must now be selected.
- Select Teach air-conditioning compressor and follow the instructions on the Tester.
- Read out fault memory and erase it if necessary.