Converting Expansion Valve For The Adapter

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

If you do not have a suitable adapter for the expansion valve, you can also drill out the removed expansion valve (the old expansion valve must be replaced in most cases and is therefore no longer required).
The control element must be removed before drilling. The expansion valve must then be drilled using a suitable drill bit, for example. (Drill bit diameter: 6.0 mm for example).
Some parts may have to be removed from the expansion valve before drilling, depending on the type of expansion valve.

Remove components -H, I and K- from expansion valve -G- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Expansion valve
Drill out area -L- using a suitable drill bit.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Expansion valve
Clean the drilled out expansion valve to remove any bits left after machining (chips).
Re-install components -H, I and K- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Expansion valve