Programming/Teaching Roof Assembly (Panorama Roof) End Position
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
The end positions are lost and must be re-taught in the following situations:
- After emergency operation
- After replacing the glass panel, motor, powered sunroof mechanism or sun blind
The force limiters are not available when storing the end positions. The panorama roof and sun blind therefore close with full force!
NOTE:
Electrically moved components
- Risk of damage to components
→ Move objects out of the range of movement.
- Park the vehicle and start the engine.
Information
When storing the end positions, always save the settings for the panorama roof and sun blind fully one after the other. If one of the processes is interrupted, it is not possible to start the process for the other drive mechanism.
- Press the actuating button for the panorama roof forward towards Close and keep it pressed until the panorama roof is closed fully and has stopped moving. The process for storing the end position will start after approx. 10 seconds.
- Press the actuating button for the sun blind forward towards Close and keep it pressed until the sun blind is closed fully and has stopped moving. The process for storing the end position will start after approx. 10 seconds.
- Check that the panorama roof and sun blind operate correctly.