LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (80 Heater - Coupe -- 971 - PANAMERA (971)) >> WM, 803019 Removing And Installing Heat EXCHANGER Supply Hose >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heat shield for plenum panel -2-  and screw in clamping washers -1-  .
    G15874766Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing heat shield for plenum panel

  2. Only for Panamera 4S Diesel: 

    Install engine cover (design cover).

    > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

  3. Only for Panamera 4S: 

    Install heat shield for turbocharger.

    > Removing and installing heat shield for turbocharger 

  4. Install rear part of front wheel housing liner.

    > WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER

  5. Fill with coolant.

    > Draining and filling coolant 



  1. Install rear part of front wheel housing liner.

    > WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER

  2. Install heat shield for plenum panel -2-  and screw in clamping washers -1-  .
    G15874775Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing heat shield for plenum panel

  3. Install rear seal on front lid.

    > 553319 REMOVING AND INSTALLING FRONT LID SEAL

  4. Install the engine.

    > 100119 REMOVING AND INSTALLING ENGINE- section on "Installing" 

scientia non olet · About LEMON Manuals