LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (74 Seat Cushions, Seat Covers - Coupe -- 971 - PANAMERA (971)) >> WM, 745619 Removing And Installing Lock For Load-Through System >> Removing Lock For Load-Through Provision

Removing Lock For Load-Through Provision

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold over load-through provision.
  2. Unscrew and remove screw -2-  .
    G15874068Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw

  3. Unclip cover -1-  .
    G15874069Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cover

    Information 

    Make sure that the two spacer sleeves do not fall in between the backrest frame and cushion during removal and installation.

  4. Unscrew and remove screws -3-  .
    G15874070Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  5. Remove spacer sleeves -4-  .
    G15874071Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Spacer sleeves

  6. Disengage operating cable -5-  .
    G15874072Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Operating cable

  7. Remove lock for load-through provision -6-  .
    G15874073Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Load-through provision lock

scientia non olet · About LEMON Manuals