LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (74 Seat Cushions, Seat Covers - Wagon -- 971 - PANAMERA (971)) >> WM, 745619 Removing And Installing Lock For Load-Through System >> Installing Lock For Load-Through Provision

Installing Lock For Load-Through Provision

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws securing load-through provision lock to load-through provision > Tightening torque 20 Nm (15 ftlb.) +/- 2 Nm (1.5 ftlb.) 

    Screw in and tighten screw securing cover to load-through provision lock > Tightening torque 1.5 Nm (1 ftlb.) 

scientia non olet · About LEMON Manuals