LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (74 Seat Cushions, Seat Covers - Wagon -- 971 - PANAMERA (971)) >> WM, 745319 Removing And Installing Cover For Rear Backrest >> Installing Cover For Rear Backrest

Installing Cover For Rear Backrest

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. Fit new  cushion clips using > V.A.G 1634B - Cushion Clip Pliers  .
    NOTE: Risk of damage to cover if excessive heat is applied. 
    • Creases in cover 

      → If creases have formed, only short partial warming with the hot-air gun is permissible.

      → The hot-air temperature of 50°C must always be observed.

  3. If creases have formed, partially heat affected areas of the cover with the hot-air gun and smooth out the cover using special tools:

    > 9747 - Wetting-off iron 

    > 9747/1 - Knurling iron 

    > 9747/2 - Bone burnisher 

    > V.A.G 1416 - Hot-Air Blower 

scientia non olet · About LEMON Manuals