Joining Process

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The contact surfaces on the adhesive tape or adhesive pad must remain free of dirt, grease and moisture. Do not touch the contact surfaces.

If adhesive tape or an adhesive pad has to be affixed to a spare part:

Remove first piece of film from adhesive tape or adhesive pad.

Press on adhesive tape or adhesive pad over the entire surface for at least > Time 2 min .

Remove second piece of film from adhesive tape or adhesive pad.

Press spare part with applied adhesive tape or adhesive pad onto body over the entire surface for at least > Time 2 min .

If adhesive tape or adhesive pad is already affixed to spare part on delivery:

Remove film from adhesive tape or adhesive pad.

Press spare part with applied adhesive tape or adhesive pad onto body over the entire surface for at least > Time 2 min .