Working With PORSCHE 2-Component Window Adhesive: Hardening
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
The Porsche 2-component window adhesive hardens in the following temperature range:
> Minimum temperature 18°C
> Maximum temperature 35°C
Hardening can be accelerated by heat (e.g. using a painting booth). The bead of adhesive you pressed out earlier can be used to check whether the adhesive has hardened properly.
Do not put pressure on bonded parts until the required assembly strength is reached.