Technical Values - Retaining Strips
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screw securing retaining strip to wing | Item 2 | Tightening torque | 2.8 Nm (2.1 ftlb.) | |
|
Screw securing retaining strip to wing |
||||
| Screws for retaining strip under headlight | Item 2 | Tightening torque | 5.5 Nm (4.1 ftlb.) | |
|
Screws for retaining strip under headlights |
||||
| Screws for rear retaining strip side | Item 1 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Screws for rear retaining strip at the sides |
||||
| Nut on retaining strip for tail light | Item 7 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Nuts for holder with heat protection |
||||
| Nuts on centre retaining strip | Item 1 | Tightening torque | 6 Nm (4.4 ftlb.) | |
|
Nuts on centre retaining strip |
||||
| Nut on centre retaining strip bottom | Item 1 | Tightening torque | 3.5 Nm (2.6 ftlb.) | |
|
Nut on centre retaining strip at the bottom |
||||
| Screw for retaining strip with heat protection | Item 5 | Tightening torque | 2.5 Nm (1.8 ftlb.) | |
|
Screw for retaining strip on rear light |
||||
| Nut on retaining strip with heat protection | Item 6 | Tightening torque | 9 Nm (6.6 ftlb.) | |
|
Nuts for holder with heat protection |
||||