Technical Values - Rear Apron
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screws on tail light trim panel | Item 6 | Tightening torque | 6 Nm | |
|
Screws on tail light trim panel |
||||
| Screws securing rear apron to retaining frame | Item 2 | Tightening torque | 3 Nm | |
|
Screws securing rear apron to retaining frame |
||||
| Screw securing rear apron to side panel | Item 3 Self-locking screw, must always be replaced | Tightening torque | 7 Nm | |
|
Screw securing rear apron to side panel |
||||
| Screw securing rear apron to frame for light | Item 7 | Tightening torque | 3 Nm | |
|
Screw securing rear apron to frame for light |
||||
| Screw securing rear skirt to rear apron | Item 1 | Tightening torque | 2.5 Nm | |
|
Screw securing rear skirt to rear apron |
||||
| Screws for number plate cover | Tightening torque | 0.7 Nm | ||
|
Screws for number plate trim |
||||