LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (6X Body-Equipment Outside-General - Coupe 971 - PANAMERA (971)) >> WM, 6X00IN Eliminating Symptoms On Body Exterior - Touching Up Paintwork (Swelling Of Clear Lacquer/SY4315) >> Tools And Materials >> Touching Up Paintwork

Touching Up Paintwork

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transport protection.
  2. Check the paint on the vehicle for signs of swelling.

If you see signs of swelling of the paint, this can be reduced by applying heat. This can be done as follows:

Applying heat using a hot-air gun: 

Information 

Do not expose plastic parts and mouldings to excessive heat.

  1. Set the hot-air gun to > Temperature 65°C +/- 5°C  .
  2. Apply heat uniformly over the problem area.
  3. While applying heat, monitor the temperature of the affected area using a temperature gauge. The temperature on the body must not exceed the set value.
  4. Continue to apply heat until there is no more swelling to be seen.