LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (46 Brakes - Brake Mechanism 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 461019 Removing And Installing Mounting Saddle >> Installing Mounting Saddle

Installing Mounting Saddle

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
  2. Align mounting saddle -1-  with the cowl panel and firewall guide -3-  .
    G15856858Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting saddle

  3. Screw in and tighten screws -2-  > Tightening torque 23 Nm (17 ftlb.) 
    G15856859Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on mounting saddle

  4. Screw in and tighten nuts -2-  > Tightening torque 23 Nm (17 ftlb.) + 2 Nm (1.5 ftlb.) 
    G15856860Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Nuts on mounting saddle

scientia non olet · About LEMON Manuals