LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (46 Brakes - Brake Mechanism 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 465019 Removing And Installing Front Brake Disc >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Brake calliper to wheel bearing housing Item 2: Cheese head screw M14 x 1.5/always replace screws after dismantling! Initial tightening 30 Nm (22.1 ftlb.)    
G15859713Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper on front axle
Brake calliper to wheel bearing housing Item 2: Cheese head screw, M14 x 1.5/Always replace screws after dismantling! Final tightening torque angle + 90°    
G15859714Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper on front axle
Brake line holder to wheel bearing housing Item 4: Hexagon-head bolt, M6 x 16 Tightening torque 8 Nm (6 ftlb.)    
G15859715Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake line holder
Brake disc to wheel hub Arrows: Countersunk screw, M6 x 12 (micro-self-locking)/al ways replace screws following removal! Tightening torque 5 Nm (3.5 ftlb.)    
G15859716Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake disc fastening screws