LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (46 Brakes - Brake Mechanism 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 468519 Removing And Installing Spreader Device (EPB Actuator) >> Installing Spreader Device (EPB Actuator)

Installing Spreader Device (EPB Actuator)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the actuator carefully so as not to damage the dust boots.
  2. Visually inspect the dust boots for cracks.

    Information 

    Do not twist brake shoe mountings during installation.

  3. Installation is performed in reverse order.
  4. When re-using the (EPB) actuator, secure it in the brake shoe mountings with a tie-wrap to prevent it from twisting -arrow-  .
    G15858429Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing actuator for EPB

  5. Screw in and tighten new  screws.

    > Initial tightening 20 Nm (15 ftlb.) 

    > Final tightening + 60°