LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (46 Brakes - Brake Mechanism 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 468320 Removing And Installing Brake Shoes >> Removing Brake Shoes

Removing Brake Shoes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Preloaded or pressurized components 
  • Risk of injury (e.g. crushing or bruising) when removing and installing springs. 

    → Do not reach into the danger area.

    → Relieve the tension on components before starting work.

    → Secure components to prevent them from loosening suddenly.

    → Wear protective gloves and goggles.

    → Be very careful when working on the brake system.

  1. Loosen the adjustment device -2-  using a screwdriver.
    G15858412Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening adjustment device

  2. Remove compression springs -3-  .
    G15858413Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  3. Remove lower tension spring -4-  (at the adjustment device).
    G15858414Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  4. Remove adjustment device -2-  .
    G15858415Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening adjustment device

  5. Remove upper tension spring -4-  .
    G15858416Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  6. Remove brake shoes.
  7. Secure actuator for EPB using a tie-wrap -arrow-  .
    G15858417Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing actuator for EPB