Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Brake calliper to wheel bearing housing | Item 2: Cheese head screw M14 x 1.5/always replace screws after dismantling! | Initial tightening | 30 Nm (22.1 ftlb.) | ||
|
Brake calliper on front axle |
|||||
| Brake calliper to wheel bearing housing | Item 2: Cheese head screw, M14 x 1.5/Always replace screws after dismantling! | Final tightening torque angle | + 90° | ||
|
Brake calliper on front axle |
|||||
| Brake line holder to wheel bearing housing | Item 4: Hexagon-head bolt, M6 x 16 | Tightening torque | 8 Nm (6 ftlb.) | ||
|
Brake line holder |
|||||
| Brake disc to wheel hub | Arrows: Counters unk screw, M6 x 12 (micro-self-locking)/always replace screws following removal! | Tightening torque | 5 Nm (3.5 ftlb.) | ||
|
Brake disc fastening screws |
|||||