Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Brake disc Ø, front | 420 mm | ||||
| Brake disc Ø, rear | 390 mm | ||||
| Brake disc thickness, front | 40 mm | ||||
| Brake disc thickness, rear | 32 mm | ||||
| Thickness tolerance of brake disc, max. | 0.01 mm | ||||
| Effective brake disc Ø, front | 324.6 mm | ||||
| Effective brake disc Ø, rear | 321.6 mm | ||||
| Brake pad area per wheel, front | 330 cm2 | ||||
| Brake pad area per wheel, rear | 153.8 cm2 | ||||
| Pad thickness, front | Wear limit 2 mm | approx. 8.4 mm | |||
| Pad thickness, rear | Wear limit 2 mm | approx. 11.9 mm | |||
| Wear limit of front and rear brake discs | Measure using VAS 6813 test equipment. Note measuring prerequisites. New values/wear values and three measuring points are lasered onto the brake disc hub. Wear value reached: Replace PCCB brake discs on both sides of the axle. | Measured value | XX/XX Read value on brake disc hub | ||
| Thickness tolerance of brake discs (max.) | Measured value | 0.02 mm | |||
| Lateral runout of brake disc (max.) | Measured value | 0.03 mm | |||
| Lateral runout of wheel hub (max.) | Measured value | 0.03 mm | |||
| Lateral runout of brake disc when installed (max.) | Measured value | 0.06 mm | |||