LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (82 Auxiliary Heating - Coupe -- 971 - PANAMERA (971)) >> WM, 825919 Removing And Installing Muffler >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Strut with mounting anti-roll bar to body M12 x 1.5 x 90 thread/always replace bolts following removal. Initial tightening 70 Nm (51.6 ftlb.)    
Strut with mounting anti-roll bar to body M12 x 1.5 x 90 thread/always replace bolts following removal. Final tightening + 180°    
Strut to body Hexagon-head bolt, M10 x 25/always replace bolts following removal. Initial tightening 50 Nm (36.9 ftlb.)    
Strut to body Hexagon-head bolt, M10 x 25/always replace bolts following removal. Final tightening + 45°    
Nut securing silencer to body   Tightening torque 3.5 Nm (2.6 ftlb.)    
G15874864Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing silencer
Screw-type clamp securing exhaust pipe to heater   Tightening torque 6 Nm (4.4 ftlb.)    
G15874865Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening clamp
Screws for cover on front underbody Item 1 Tightening torque 2.5 Nm (1.75 ftlb.)    
G15874866Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws for cover on front underbody