Installing Heater Holder
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Position rubber buffer -2-
of heater holder -1-
in the guide -3-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Positioning rubber buffer
- The remaining installation steps are performed in reverse order. Pay particular attention to the following:
Tightening torque for screws securing heater to holder: > Tightening torque 20 Nm (14.75 ftlb.)