Removing Heater

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Hot components

Risk of burns
→ Let hot components cool down.

→ Wear personal protective gear.

NOTE: Danger of scalding

Coolant can be very hot.
Coolant may be pressurised.
→ Only remove the heater when the cooling system has cooled down.

→ By carefully opening the catch on the reservoir, make sure that the cooling system is depressurised.

NOTE: Danger of slipping due to emerging coolant

The emerging coolant will make the floor of the workshop slippery and may cause people to slip and fall over.
→ Collect emerging coolant in a suitable pan.

Release and disconnect electric plug connection -1- .

1.1 Unclip wire harness -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection on heater

Clamp coolant hoses -4- using > V.A.G 1275A - Hose clip pliers and place a collection container underneath.
Unclip line bracket at the coolant hose.
Open clamps -5- using > VAS 6889 - Spring Band Clamp Pliers and disconnect coolant hoses -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling off coolant hoses
WARNING:
Emerging fuel
- Risk of fire
  → Avoid contact with hot parts or sources of ignition.
  
  → Collect emerging fuel, absorb it if necessary with a suitable binding material and dispose of properly.
  
  → Use suction to remove ignitable vapours.
  
  → Attach warning sign to vehicle in a clearly visible position.
Open clamp -6- and pull fuel line -7- off the heater.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling off fuel line
Unscrew nuts -8- and pull out heater -1- in direction of travel.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing heater