LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (94 Lights, Lamps, Switches Exterior -- 971 - PANAMERA (971)) >> WM, 947919 Removing And Installing Rear Angle Sensor For Headlight Beam Adjustment (HBA) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the rear angle sensor for headlight beam adjustment (HBA) was replaced:  Calibrate the levelling system.

    > WM, 430115 CALIBRATING THE LEVELLING SYSTEM

  2. If the rear angle sensor for headlight beam adjustment (HBA) was replaced:  Calibrate angle sensors for headlight beam adjustment.
    1. 2.1 > 9900 - PIWIS Tester 3  must be connected to the vehicle before starting the Tester. Switch on ignition using original remote control (hand-held transmitter).
    2. 2.2 Using > 9900 - PIWIS Tester 3  , select Front-end electronics control unit > Maintenance/repairs > Teach headlight levelling system.