LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (94 Lights, Lamps, Switches Exterior -- 971 - PANAMERA (971)) >> WM, 947819 Removing And Installing Front Angle Sensor For Headlight Beam Adjustment (HBA) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Nut securing front angle sensor for headlight beam adjustment to front-axle carrier Item 1 Tightening torque 8 Nm (6 ftlb.)    
G15875986Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nut securing front angle sensor for headlight beam adjustment to front-axle carrier
Screw front HBA angle sensor to trailing arm above Item 3 Initial tightening 3 Nm (2 ftlb.)    
G15875987Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for front angle sensor for headlight beam adjustment
Screw front HBA angle sensor to trailing arm above Item 3 Final tightening + 45°    
G15875988Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for front angle sensor for headlight beam adjustment