LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (42 Rear Wheel Suspension Drive Shaft 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 429019 Removing And Installing Anti-Roll Bar >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance Tolerance
Anti-roll bar mount to rear axle housing Item 2: Hexagon-head bolt, M8 x 35/always replace bolts following removal! Initial tightening 20 Nm (15 ftlb.)    
G15862032Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for anti-roll bar mount
         
Anti-roll bar mount to rear axle housing Item 2: Hexagon-head bolt, M8 x 35/always replace bolts following removal! Final tightening torque angle + 90°    
G15862033Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for anti-roll bar mount
         
Bearing protective plate to rear axle housing Item 2: Hexagon-head bolt M5 Tightening torque 7 Nm (5.2 ftlb.)    
G15862034Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Protective plate mount