LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (42 Rear Wheel Suspension Drive Shaft 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 429019 Removing And Installing Anti-Roll Bar >> Removing And Installing Anti-Roll Bar >> Removing Anti-Roll Bar

Removing Anti-Roll Bar

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove protective plate on the rear axle housing bearing -1-  on both sides of the vehicle.
    G15862035Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting protective plate

    1. 1.1 Unscrew fastening screws -2-  .
  2. Remove anti-roll-bar mount -1-  .
    G15862036Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for anti-roll-bar mount

    1. 2.1 Unscrew fastening screws -2-  .
  3. With the help of another person, turn the anti-roll bar alternately -arrow A-  to the right and guide it out -arrow B-  .
    G15862037Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Guiding out anti-roll bar

scientia non olet · About LEMON Manuals