LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (42 Rear Wheel Suspension Drive Shaft 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 429337 Disassembling And Assembling Rear Shock Absorber >> Disassembling And Assembling Shock Absorber >> Disassembling Shock Absorbers

Disassembling Shock Absorbers

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the -1-  shock absorber mounting.
    1. 1.1 Unscrew -2-  nut using > T10001 - the shock absorber set  while at the same time holding back the multiple-tooth screw of the piston rod -3-  .
    2. 1.2 Remove shock absorber mount -1-  from piston rod -3-  .
    G15859391Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Shock absorber mounting

  2. Pull supporting washer -1-  from piston rod -2-  .
    G15859392Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Support washer

  3. Remove stop buffer -1-  and protective sleeve -2-  .
    1. 3.1 Pull stop buffer -1-  with protective sleeve -2-  from the piston rod.
    2. 3.2 Pull stop buffer -1-  from protective sleeve -2-  .
    G15859393Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Stop buffer and protective sleeve

scientia non olet · About LEMON Manuals