LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (42 Rear Wheel Suspension Drive Shaft 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 420519 Removing And Installing Rear Axle Housing >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Rear axle housing to body Item 1: Hexagon head bolt M14 x 1.5 x 145/Always replace bolts following removal! Initial tightening 130 Nm (95.9 ftlb.)    
G15859124Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for rear axle housing
Rear axle housing to body Item 1: Hexagon-head bolt M14 x 1.5 x 145/Always replace bolts after removal! Final tightening torque angle + 180°    
G15859125Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for rear axle housing
Drive shaft protective plate to rear axle housing (right with TPM control unit holder) Item 2: Hexagon round-head bolt M6 x 12 Tightening torque 8 Nm (5.9 ftlb.)    
G15859126Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for protective plate for drive shaft
Bearing protective plate to rear axle housing Item 2: Hexagon-head bolt M5 Tightening torque 7 Nm (5.2 ftlb.)    
G15859127Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Protective plate mount
Balancer to rear axle housing Hexagon-head bolt, M10 x 30 Tightening torque 55 Nm (40.6 ftlb.)    
Rear axle strut to rear axle housing mount Item 2: Hexagon-head bolt M8 x 25 Tightening torque 20 Nm (14.8 ftlb.)    
G15859128Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for rear-axle strut
Rear axle strut to body strut Hexagon-head bolt M8 x 25 Tightening torque 20 Nm (14.8 ftlb.)    
G15859129Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for rear-axle strut
Heat insulation in boot pan Item 2: Internal hexagon roundhead bolt Tightening torque 2.5 Nm (1.8 ftlb.)    
G15859130Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for heat insulation in luggage compartment pan
Shock absorber/spring damper to body Item 2: Hexagon-head bolt M10 x 42 Tightening torque 50 Nm (36.9 ftlb.)    
G15859131Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear shock absorber/spring damper
Air line to rear air spring Item 3: Union nut Tightening torque 2 Nm (1.5 ftlb.)    
G15859132Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Plug connections on air spring bellows
Drive shaft to wheel hub Item 1: Hexagon nut, M22 x 1.5/alway s replace nut following removal! Tightening torque 460 Nm (340 ftlb.)    
G15859133Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Axle nut